Lexus Workshop Service and Repair Manuals

Alignment: Specifications
Front

SERVICE SPECIFICATIONS 

Vehicle Height 

NOTE:
^

Front Measuring Point:

Measure from the ground to the center of the lower suspension arm front mounting bolt.

^

Rear Measuring Point:

Measure from the ground to the center of the No. 2 lower suspension arm mounting bolt.

Tire Size P225/55R 16:

Front ................................................................................................................................................................................... 190.5 mm (7.500 inch)
Rear .................................................................................................................................................................................... 246.2 mm (9.693 inch)

Camber ................................................................................................................................................................................ 0°02' +/- 45' (0.03° +/- 0.75°)

Left-Right Error .................................................................................................................................................................................. 30' (0.5°) or less

Caster .................................................................................................................................................................................. 3°01' +/- 45' (3.02° +/- 0.75°)

Left-Right Error ................................................................................................................................................................................. 30' (0.5°) or less.

Steering Axis Inclination ................................................................................................................................................... 9°02' +/- 45' (9.03° +/- 0.75°)

Left-Right Error .................................................................................................................................................................................. 30' (0.5°) or less

Toe-In (Totals)

Degrees .............................................................................................................................................................................. 0°06' +/- 12' (0.1° +/- 0.2°)
Linear .......................................................................................................................................................................... 1 +/- 2 mm (0.04 +/- 0.08 inch)
Tie Rod End Length Difference .................................................................................................................................................... 1.5 mm (0.059 inch)

Wheel Angle (Maximum)

Inside Wheel ....................................................................................................................................................................................................... 37°04'
Outside Wheel (Reference) ................................................................................................................................................................................. 32°23'

TIGHTENING SPECIFICATIONS

Adjusting Cam Bolt ..................................................................................................................................................................... 226 Nm (166 ft. lbs.)