Navigator 4WD V8-5.4L VIN 5 (2006)
8. Remove and discard the 3 flex-coupler-to-flange nuts and the 3 flex-coupler-to-flange bolts.
9. Remove and discard the 4 driveshaft flange bolts.
10. CAUTION: The driveshaft flange fits tightly on the pinion flange pilot. Never hammer on the driveshaft or any of its components to disconnect
the driveshaft from the pinion flange. Pry only in the area shown, with a suitable tool, to disconnect the driveshaft flange from the pinion flange.
Using a suitable tool, disconnect the driveshaft flange from the pinion flange.
11. Remove the 2 driveshaft center bearing bolts, then remove the driveshaft.
^
Discard the driveshaft center bearing bolts.
Installation
4WD vehicles