Navigator 4WD V8-5.4L VIN 5 (2006)
1. Align all the index marks and install the driveshaft slip yoke into the transmission extension housing.
2. CAUTION: The driveshaft flange fits tightly on the pinion flange pilot. To make sure that the driveshaft flange seat squarely on the pinion flange
pilot, tighten the driveshaft flange bolts evenly in a cross pattern.
CAUTION: If new driveshaft flange bolts are not available, coat the threads of the original driveshaft flange bolts with Threadlock and Sealer.
Align the index marks and install the driveshaft flange and the driveshaft flange bolts.
^
Tighten to 112 Nm (83 ft. lbs.).
2WD vehicles
3. CAUTION: If new driveshaft center bearing bolts are not available, coat the threads of the original driveshaft center bearing bolts with
Threadlock and Sealer.
Position the driveshaft center bearing and hand-tighten the 2 new driveshaft center bearing bolts until the driveshaft is mounted to the flanges.
^
Tighten to 48 Nm (35 ft. lbs.).
