3 L4-2.5L (2010)
-
If it exceeds the maximum specification, replace the clutch cover. See: Service and Repair/Clutch Unit Removal/Installation [G35M-R,
G66M-R]
Maximum clearance of flatness of the pressure plate
-
0.5 mm {0.02 in}
12. When checking the diaphragm spring fingers, mount a dial gauge on the cylinder block.
13. Rotate the flywheel and check for misaligned diaphragm spring fingers.
-
If it exceeds the maximum specification, replace the clutch cover. See: Service and Repair/Clutch Unit Removal/Installation [G35M-R,
G66M-R]
Clutch cover diaphragm spring fingers maximum height difference
-
1.0 mm {0.039 in}