6 L4-2.5L (2010)
Letters above in the illustration is for orientation of the block diagram only.
1. Clean location where silicone sealant will be applied.
2. Using a scraper or a similar tool, completely remove gasket residue from joint of cylinder block, front cover and oil pan.
NOTE:
Do not allow the gasket residue to enter the oil pan. Using cleaning fluid, completely remove the oil from the joint. Be sure to completely remove oil and
gasket residue from the corner section of the front cover and the cylinder block.
Recommended Cleaner:
- Mazda Brake Parts Cleaner (low VOC, non-chlorinated) P/N: 000-77-620E-05 or equivalent.
3. Completely clean and remove any oil, dirt, sealant or other foreign material that may be adhering to the housing and oil pan.
CAUTION:
