6 V6-3.0L (2007)
1. Press the bushing (inner side) out using the SSTs.
Front Lower Arm (Front) Bushing (Outer Side) Removal Note
1. Press the bushing (outer side) out using the SSTs.
Front Lower Arm (Front) Bushing (Outer Side) Installation Note
1. Mark the new bushing as shown in the figure.
2. Press the bushing in to the marking using the SSTs.
3. Verify that clearance distance A-B is 8.75 - 10.75 mm (0.3445 - 0.4232 Inch).
Front Lower Arm (Front) Bushing (inner Side) Installation Note