6 V6-3.7L (2009)
5. Install the crossmember bracket bolts A, and tighten the crossmember nut B.
Tightening torque
-
Bolts A: 94-116 Nm {9.6-11 kgf-m, 70-85 ft-lbf}
-
Nut B: 120-154 Nm {13-15 kgf-m, 89-113 ft-lbf}
6. Connect the steering pipe to the front crossmember.
Tightening torque
-
8-10 Nm {82-101 kgf-cm, 71-88 in-lbf}
7. Install the radiator hose bracket to the front crossmember.
Front Lower Arm Inner Side Bolt (Front) Installation Note [MZI-3.7]
1. Move the engine and transaxle slightly towards the front side of the vehicle.
2. Install the front lower arm inner side bolt (front).
3. Install the No. 1 engine mount (engine side). See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Removal/Installation