B2500 SX Regular Cab 2WD L4-2.5L VIN C (1999)
Valve Cover: Service and Repair
VALVE COVER REMOVAL / INSTALLATION
1. Disconnect the negative battery cable.
2. Disconnect the Intake Air Temperature (IAT) sensor.
3. Remove the air cleaner outlet tube.
4. Remove the accelerator control splash shield.
5. Remove the accelerator cable.
6. Disconnect the crankcase vent hose from the valve cover.
7. Disconnect the fuel charging wiring from the Idle Air Control (IAC) valve and the Throttle Position (TP) sensor.