B3000 DS Cab Plus 2WD V6-3.0L OHV (2001)
Insert a punch in the bolt holes and drive the ring gear off.
Ring Gear And Speed Sensor Rotor Installation Note
1. Install the rotor by aligning the tab on rotor with the slot in the differential case.
Caution: Start two of the ring gear bolts through the differential case and into the ring gear to make sure the ring gear bolt holes align with the
differential case bolt holes properly.
2. Press the new rotor and ring gear on the differential case.
3. Coat the threads of the ring gear retaining bolts with sealant.
4. Install bolts and alternately tighten evenly.
Tightening torque 95 - 115 Nm (9.7 - 11.7 kgf-cm, 70 - 85 ft. lbs.)