B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
3. Position the oil pan gasket.
4. Position the oil pan and install the bolts.
1) Tighten the bolts in five steps:
2) Tighten the four corner bolts to 10 - 14 Nm (89 - 123 inch lbs.)
3) Tighten the remaining bolts to 10 - 14 Nm (80 - 123 inch lbs.)
4) Tighten the four corner bolts to 10 - 14 Nm (89 - 123 inch lbs.)
5) Loosen all bolts one turn.
6) Tighten all bolts to 10 - 14 Nm (89 - 123 inch lbs.)
5. Install the nuts.
Front Cover Installation Note
1. Clean all sealing surfaces and position a new front cover Gasket.
2. Install the engine front cover.
3. Apply pipe sealant to the bolts to be installed in the locations shown.