B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
2) Tighten to 20 - 25 Nm (15 - 18 ft. lbs.).
11. Install in reverse order of removal.
LEFT HAND EXHAUST MANIFOLD REMOVAL AND INSTALLATION
1. Disconnect the negative battery cable.
2. Raise the vehicle on a hoist; refer to General Information.
3. Remove the nuts.
4. Lower the vehicle.
5. Disconnect the EGR valve to exhaust manifold tube.
6. Remove the nut.
7. Remove the bolts and the nuts.
8. Remove the exhaust manifold and the exhaust manifold gasket.
9. Install the bolts and the nuts;.
-
Tighten the nuts and the bolts in sequence in two steps: