B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
4. Install the pulley snap ring with the bevel side out.
5. Place one nominal thickness A/C clutch hub spacer inside the clutch hub spline opening.
6. Install the A/C clutch.
7. Install the A/C clutch hub retaining bolt.
1. Hold the A/C clutch hub with the Spanner Wrench.
2. Tighten the bolt.
8. Measure and adjust the clutch air gap by removing or adding A/C clutch hub spacers.
9. Install the A/C compressor.
