B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
Audible Warning Device: Description and Operation
- The generic electronic module/central timer module (GEM/CTM) are connected to the ISO link and are diagnosed through the data link connector
(DLC) with New Generation STAR (NGS) Tester.
When the ignition switch is turned to RUN or START from OFF or ACC, the chime will sound for six seconds or until the safety belt is buckled.
The safety belt warning indicator lamp will turn on for 60 seconds or until the driver safety belt is fastened. Both the chime and the lamp turn on at the
If the safety belt is buckled while the ignition switch is turned to RUN or START; from OFF or ACC, neither the chime nor lamp will be activated.
Anytime the ignition switch is changed to RUN from START while the safety belt warning indicator is activated, the safety belt warning indicator will
remain activated until either the timing sequence has been executed or the safety belt is buckled.
There are four warning chimes and lamps the GEM/ CTM controls: headlamps operating without the ignition on (chime only), door ajar (chime and
lamp), key-in-ignition (chime only), and driver seat belt warning (chime and lamp).
When at least one door is a jar and the key is in the RUN position, the door ajar cluster lamp is activated and remains on until all doors are closed. A
warning tone will sound once any time the key is in the ignition switch and any door is open.
The key-in-ignition warning will sound when the driver side front door is opened with the key in the ignition switch and the ignition switch in OFF or
ACC. It will continue to sound until the key is removed, the front door is closed, or the ignition switch is in RUN or START
The headlamp-on reminder chime will be activated if the headlamps or parking lamps are on, the key is not in the ignition switch, and the driver door is