mazda Workshop Repair Guides

Mazda Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Temperature Sensor (Gauge): Service and Repair

REMOVAL AND INSTALLATION 

1. Remove the radiator cap. 
2. Disconnect the temperature sending unit wire. 

3. Remove the water temperature sender unit.
4. Apply sealant to the threads of the new water temperature sender unit.
5. Install in reverse order of removal.

Tightening Torque: 11 - 24 Nm (8 - 18 ft. lbs.) 

Instrument Panel, Gauges and Warning Indicators > Temperature Sensor (Gauge) > Component Information > Service and Repair

< PREV PAGE NEXT PAGE >