mazda Workshop Repair Guides

Mazda Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Power Window Switch: Service and Repair

1. Remove the two screws and reposition door trim panel finish panel.

2. Remove in order shown in illustration.

1. Screws
2. Switch plate
3. Switch

3. Install in reverse order of removal.

Tightening torque: 

2-3 N.m { 20-31 kgf.cm, 18-26 in.lbf }

Sensors and Switches > Sensors and Switches - Windows and Glass > Power Window Switch > Component Information > Service and Repair

< PREV PAGE NEXT PAGE >