B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
Power Steering Fluid: Service and Repair
CAUTION: Do not mix oil types, any mixture or any unapproved oil could lead to seal deterioration and leaks. A leak could ultimately cause loss of
fluid, which could result in a loss of power steering assist.
1. Fill the reservoir with the appropriate fluid.
2. Remove fuse 19 (25A) from I/P fuse panel.
3. Raise the front wheels off the floor.
CAUTION: Do not crank the engine for more than 15 seconds at a time. Allow the starter to cool for 1 minute before cranking again. Premature
starter failure can occur.
CAUTION: Do not hold the steering wheel against the stops for more than three to five seconds at a time. Damage to the power steering pump
could occur.
4. Turn the steering wheel from stop-to-stop while cranking the engine. Check for fluid leakage.
5. Lower the vehicle.
CAUTION: Do not overfill the reservoir.
6. Fill the reservoir with the appropriate fluid.
7. Install Fuse 19 (25A)
