B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
16.
Install the new cover to the axle housing. Install the new vent hose and clip from the kit to the cover. Tighten all bolts to 20-25 lb-ft (27-34 N.m).
17.
Connect the new vent hose to the existing vent hose using the in-line connector supplied in the kit.
18.
Remove the old vent from the axle assembly and install the pipe plug supplied in the kit.
19.
Raise the axle into position and install the axle support bushing bolts and NEW nuts. Torque the bolts to 49 lb-ft (66 N.m).
20.
Install the axle support-mounting bracket to the axle housing. Torque the bolts to 78 lb-ft (106 N.m).
21.
Install the driveshaft using new bolts. Torque to 14 lb-ft (19 N.m).
22.
Remove axle housing fill plug and fill with 3.25 pints (1.54 L) using API service SAE 80W-90 GL5 oil for differential lubrication. Install fill plug.
23.
Verify repair by driving the vehicle a short distance, checking both 2WD and 4WD operation.
PART(S) INFORMATION
WARRANTY INFORMATION
