B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
Fluid - M/T: Testing and Inspection
TRANSMISSION OIL INSPECTION
NOTE: Park the vehicle on level ground.
1. Remove the oil level plug and washer.
2. Verify that the Oil is near the bottom of the plug port.
3. If the oil level is low, add the specified amount and type of oil through the oil level plug hole.
Specified Oil Grade: MERCONS or M-III
4. Install a new washer and the oil level plug.
Tightening torque: 40 -58 Nm (4.1 - 5.7 kgf-m, 30-42 ft. lbs.)