CX-7 L4-2.3L Turbo (2007)
Front Door Panel: Customer Interest
Interior - Front Door Trim Panel Top Edge Wrinkled
TSB: 09-030/06
2007 CX-7 - FRONT UPPER DOOR PANEL WRINKLED ON TOP EDGE
BULLETIN NOTE
This bulletin supersedes the previous bulletin issued on 07/12/06. The APPLICABLE MODEL(S)/VINS information has been revised.
APPLICABLE MODEL(S)/VINS
2007 CX-7 vehicles with VINs between JM3ER29**70100057 - JM3ER29**70110877 ( produced from Feb. 14, 2006 through May 25, 2006)
DESCRIPTION
Some customers may notice a warped, wavy or wrinkled condition along the top edge of the driver and/or passenger side front upper door panels.
Improvements in upper door panel production have eliminated this appearance concern. Replacement of the affected upper door panel(s) is
recommended. Customers having this concern should have their vehicle repaired using the following repair procedure.
REPAIR PROCEDURE
Door Panel Removal
1.
Verify customer concern.
2.
After opening doors, lower front driver and passenger windows and confirm ignition key OFF position.
3.
Remove front A-pillar door inner garnish by pulling trim out and up.
4.
Remove cover over armrest screw and remove screw.