CX-7 L4-2.3L Turbo (2007)
9. With the slider pin pressed, slide the lock unit to fix the lock unit hook into the bracket hole securely as shown in the figure.
Caution:
^
Allowing the interlock cable to be bent or twisted during installation can affect the lock unit operation.
10. Rotate the slider pin to release the lock and verify that it slides freely
11. Pull the slider pin outward until it contacts the brake pedal stopper rubber and rotate the slider pin to lock.
12. Verify that the selector lever in the P position.
13. Install the interlock cable end to the cam pin on the selector lever.
14. Fit the interlock cable in the U-groove in the selector lever base plate and install the clip.
15. Press the interlock cable lock piece in until it is locked.
Caution:
^
Applying a load to the interlock cable while pressing the lock piece in can affect the lock unit operation.
