Grille: Service and Repair
- Make
- Mazda
- Model
- CX-9 AWD
- Engine
- V6-3.7L
- Year
- 2008
- Section
- Grille › Service and Repair
Body and FrameService and Repair
Grille: Service and Repair
RADIATOR GRILLE REMOVAL/INSTALLATION
1. Set the front over fender out of the way.
2. Remove the front bumper.
3. Remove the bolts.
4. Remove the front bumper retainers.
5. Remove the fasteners.
6. Remove the screws A.
7. Remove the grille bracket.
8. Remove the screws B.
9. Remove the tabs D.
10. Remove the ornament.
11. Remove the radiator grille.
12. Press tabs C in the direction of the arrow, pull the radiator grille inward, and remove it from the front bumper.
13. Install in the reverse order of removal.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2008 Mazda CX-9 3.7L
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Mazda touch up paint
- PARTPanel clip assortmentSearch: Mazda panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.