Mazdaspeed6 L4-2.3L Turbo (2006)
Fluid - M/T: Service and Repair
Transaxle Oil Inspection [G36M-R]
TRANSAXLE OIL INSPECTION [G36M-R]
1. Park the vehicle on level ground.
2. Remove the oil level plug and washer.
3. Verify that the oil is near the brim of the plug port.
^
If the oil level is lower than the low level, add the specified amount and type of oil through the oil level plug hole.
Manual transaxle oil [G35M-R]
Specified oil grade: API Service GL-4 or GL-5
Specified oil viscosity (All-season): SAE 75W-90
Specified oil viscosity (Above 10°C (50°F)): SAE 80W-90
4. Install a new washer and the oil level plug.
Tightening torque 39 - 59 Nm (4.0 - 6.0 kgf.m, 29 - 43 ft. lbs.)
