Millenia V6-2.5L DOHC (1999)
Tightening torque: 75 - 104 Nm (7.6 - 10.7 kgf.m, 55 - 77 ft. lbs.)
2. Remove the Special Service Tool (SST) (engine support).
Crankshaft Pulley Installation Note
1. Remove the crankshaft pulley bolt.
2. Install the crankshaft pulley and hand tighten the crankshaft pulley bolt.
3. Install the (SST)to the crankshaft pulley.
4. Tighten the crankshaft pulley bolt.
Tightening torque: 157 - 166 Nm (16 - 17 kgf.m, 116 - 122 ft. lbs.)