MPV ES V6-2.5L DOHC (2001)
-
The sharp edges of the drive shaft can slice or puncture the oil seal. Be careful when installing the drive shaft to the transaxle.
-
The oil seals are damaged easily if this procedure is not done correctly.
4. After installation, pull the transaxle side outer ring forward to confirm that the drive shaft is securely held by the clip.
Disassembly and Reassembly
DRIVE SHAFT DISASSEMBLY/ASSEMBLY
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
Boot Band (Wheel Side) Disassembly Note
Note:
-
The boot band does not need to be removed unless it is being replaced.
1. Remove the boot clamp with end clamp pliers as shown and discard the clamp.
Boot Band (Transaxle Side) Disassembly Note