MX-5 Miata LS L4-1.8L DOHC (2001)
2. Loosen the tensioner lock bolt to apply tension to the timing belt. Do not apply tension other than that of the tensioner spring.
3. Tighten the tensioner lock bolt.
4. Turn the crankshaft clockwise 2 and 1/6 times, and verify that all timing marks are correctly aligned.
Note: For the crankshaft side, face the locating pin on the pulley boss straight up.
5. Inspect for the belt deflection at the point indicated by applying moderate pressure 98 N (10 kgf, 22 lbs.).
Timing belt deflection 8.5 - 11.5 mm (0.34 - 0.45 inch)
6. If the timing belt deflection is not as specified, remove the timing belt and repeat from Timing Belt Assembly Note Step 1.
7. Hold the crankshaft using the SST.