MX-5 Miata LS L4-1.8L DOHC (2001)
Timing Belt Cover Assembly Note
1. Tighten the cylinder head cover bolts in two or three steps in the order shown.
Crankshaft Pulley Assembly Note
1. Hold the crankshaft using the SST.
Cylinder Head Cover Assembly Note
1. Verify that the grooves on the cylinder head cover are free of oil, waters and other foreign material.
2. Install the cylinder head cover gasket into the cylinder head cover.
3. Apply silicone sealant to the cylinder head as shown.
4. Hand-tighten the cylinder head cover bolt A as shown.
Caution: Be careful not to damage the OCV adapter O-ring on the camshaft cap when Installing the OCV case. Failure to do so may cause loss of
oil pressure.