MX-6 L4-1991cc 2.0L DOHC (1993)
Selector Lever
1. Slide the lock cover.
2. Disconnect the set button.
3. Pull out the selector cable from the selector lever.
4. Remove the interlock cable from the selector lever.
5. Remove the selector lever.
Selector Cable
1. Disconnect the selector cable from the manual shaft lever.
2. Pull out the selector cable from the cable bracket and remove it.
Installation
Selector Cable
1. Install the selector cable to the cable bracket.
2. Install the clip to the selector cable.
3. Connect the selector cable to the manual shaft lever.
Selector Lever