MX-6 L4-1991cc 2.0L DOHC (1993)
1. Install the selector lever.
Tightening torque:
16-22 N.m (1.6-2.3 kgf.m, 12-16 ft.lb)
2. Install the selector cable to the selector lever.
3. Push the selector lever adjust range.
4. Connect the set button.
5. Slide the lock cover and lock the set button.
6. Install the interlock cable to the selector lever.
Tightening torque:
9.8-14.7 Nm (100-150 kgf.cm, 87-130 in lb)
Indicator Panel
1. Shift the selector lever to P range.
2. Align the alignment screws in the slider with the holes in the indicator panel. Install suitable heavy-gauge wire to hold the slider.