Oil Level Gauge Pipe
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Assembly › Oil Level Gauge Pipe
EngineOil Level Gauge Pipe
Oil Level Gauge Pipe
- Apply a small amount of clean engine oil to the new O-ring.
- Push the level gauge pipe into the oil pan.
- Tighten the level gauge pipe bracket nut.
Tightening torque:
7.8—11 N·m (80—110 cm-kg, 69—95 in-lb)
- Install the level gauge.
Spark Plug
- Apply antiseize compound or molybdenum-based lubricant to the spark plug threads.
- Install the spark plugs.
Tightening torque:
15—23 N·m (1.5—2.3 m-kg, 11—17 ft-lb)
Water Outlet Pipe
- Remove all foreign material from the water outlet pipe mounting surface.
- Install a new gasket and the water outlet pipe.
Tightening torque:
19—25 N·m (1.9—2.6 m-kg, 14—19 ft-lb)
Oil Pressure Gauge Sender Unit
- Install the oil pressure gauge sender unit.
Tightening torque:
12—18 N·m (1.2—1.8 m-kg, 104—156 in-lb)
Oil Filter
- Remove all foreign material from the oil filter mounting surface.
- Apply a small amount of clean engine oil to the rubber seal of the oil filter.
- Install the oil filter and tighten it by hand until the rubber seal contacts the base.
- Tighten the filter 1 and 1/6 turn with a filter wrench.
Parts & tools for this job For 1990 Mazda MX-5
- PARTOil filterSearch: Mazda MX-5 1990 oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Mazda MX-5 engine oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.