Cylinder Head Cover
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- B Engine (B) › Cylinder Head Cover
EngineCylinder Head Cover
Cylinder Head Cover
- Apply silicone sealant to the shaded areas shown in the figure.
- Install the cylinder head cover.
Tightening torque:
4.9—8.8 N·m (50—90 cm-kg, 43—78 in-lb)
Crankshaft Pulley
Caution
• Make sure the timing belt inner guide plate is installed in the proper direction.
- Install the timing belt inner guide plate.
- Install the timing belt outer guide plate.
- Install the crankshaft pulley.
- Install the plate.
- Tighten the lock bolts with the SST.
Tightening torque:
12—17 N·m (1.25—1.75 m-kg, 109—152 in-lb)
- Remove the SST.
Water Pump Pulley
- Install the water pump pulley.
Tightening torque:
7.8—11 N·m (80—110 cm-kg, 69—95 in-lb)
Parts & tools for this job For 1990 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 1990 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.