Procedure
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Installation › Procedure
EngineProcedure
PROCEDURE
- Tighten all bolts and nuts to the specified torques.
Step 1
Transmission
- Join the engine and transmission.
- Install the transmission mounting bolts.
Caution
• Install the exhaust pipe bracket as shown.
- Tighten the bolts.
Tightening torque:
64—89 N·m (6.5—9.1 m·kg, 47—66 ft·lb)
Starter
- Install the starter to the transmission housing.
Tightening torque:
37—52 N·m (3.8—5.3 m·kg, 27—38 ft·lb)
- Install the starter bracket bolt.
Tightening torque:
37—52 N·m (3.8—5.3 m·kg, 27—38 ft·lb)
Parts & tools for this job For 1990 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 1990 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.