Removal note
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Removal › Removal note
EngineRemoval note
Removal note
P/S oil pump
Caution
• Do not damage the hoses.
- Remove the P/S oil pump with the hoses still connected.
- Position the pump away from the engine and affix it with wire.
A/C compressor
Caution
• Do not damage the hoses.
- Remove the A/C compressor with the hoses still connected.
- Position the compressor away from the engine and affix it with wire.
Step 2
Disconnect the harness connectors shown in the figure.
- P/S pressure switch
- Water thermoswitch
- Throttle sensor
- ISC
- Oxygen sensor
- Ignition coil
- Crank angle sensor
- Ground
- Injector
- Alternator
- Oil pressure gauge
- Starter
Parts & tools for this job For 1990 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 1990 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.