Timing Belt Pulley
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Timing Belt Pulley › Timing Belt Pulley
EngineTiming Belt Pulley
05U0BX-227
Timing Belt Pulley
- Reverse the direction of the SST on the flywheel.
- Install the timing belt pulley.
- Install the pulley Woodruff key with the tapered side toward the oil pump body.
- Install the pulley lock bolt.
- Tighten the pulley lock bolt.
Tightening torque:
108—118 N·m (11.0—12.0 m·kg, 80—87 ft-lb)
05U0BX-228
Idler
- Install the idler.
Tightening torque:
37—52 N·m (3.8—5.3 m·kg, 27—38 ft-lb)
05U0BX-229
Tensioner and Tensioner Spring
- Install the tensioner and the tensioner spring.
- Temporarily secure the tensioner with the spring fully extended.
Timing Belt
- Turn the crankshaft and align the timing belt pulley mark with the timing mark.
05U0BX-230
- Verify that the camshaft pulley marks are aligned with the seal plate marks.
Caution
- For intake side, align the E mark.
- For exhaust side, align the I mark.
05U0BX-029
Parts & tools for this job For 1990 Mazda MX-5
- PARTTiming belt kitSearch: Mazda MX-5 1990 timing belt kit
- TOOLEngine timing tool setSearch: Mazda engine timing tool set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.