Components
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Components › Components
Fuel and emission control systemsComponents
COMPONENTS
Removal / Inspection / Installation
- Remove in the sequence shown in the figure.
- Check all components for damage, deterioration, and restriction and repair or replace as necessary.
- Install in the reverse order of removal.
Note
When installing the exhaust system components, tighten all fasteners to the specified torque.
- Main silencer
Inspect for deterioration and restriction - Catalytic converter
Inspect.................................... page F–122 - Front exhaust pipe
Inspect for deterioration and restriction - Exhaust manifold
Inspect for damage
Parts & tools for this job For 1990 Mazda MX-5
- PARTExhaust gasketSearch: Mazda MX-5 1990 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.