Description
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Deceleration Control System › Description
Fuel and emission control systemsDescription
DESCRIPTION
The deceleration control system consists of the fuel cut operation and the dashpot.
- Dashpot: To prevent the throttle valves from suddenly closing.
- Fuel cut: To improve the fuel economy and to prevent engine bucking during deceleration.
DASHPOT
Inspection
- Open the throttle valve fully. Push the dashpot rod with a finger and verify that it goes into the dashpot slowly.
- Release the rod and check that it comes out quickly.
- Replace the dashpot if necessary.
- Warm up the engine and run it at idle.
- Connect a tachometer to the engine, and increase the engine speed to 4,000 rpm.
- Slowly decrease the engine speed and check that the lever touches the dashpot rod as specified.
Specification: 2,500 ± 150 rpm
- If not as specified, loosen the locknut and turn the dashpot to adjust.
Parts & tools for this job For 1990 Mazda MX-5
- PARTExhaust gasketSearch: Mazda MX-5 1990 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.