Description
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Description › Description
Fuel and emission control systemsDescription
DESCRIPTION
The PCV valve is operated by the intake manifold vacuum.
When the engine is running at idle the PCV valve is opened slightly and a small amount of blowby gas is drawn into the dynamic chamber to be burned.
At higher engine speeds the PCV valve is opened further, allowing a larger amount of blowby gas to be drawn into the dynamic chamber.
PCV VALVE
Inspection
- Warm up the engine to the normal operating temperature and run it at idle.
- Disconnect the PCV valve together with the ventilation hose from the cylinder head cover.
- Block the PCV valve opening.
- Verify that vacuum is felt.
- Remove the PCV valve.
- Blow through the valve from port A and verify that air comes out of port B.
- Blow through the valve from port B and verify that no air comes out of port A.
- Replace the PCV valve if necessary.
Parts & tools for this job For 1990 Mazda MX-5
- PARTExhaust gasketSearch: Mazda MX-5 1990 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.