Removal note
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- [F] › Removal note
Fuel and emission control systemsRemoval note
| 1. Fuel filler hoses | |
| 2. Fuel hoses | |
| 3. Evaporative hoses | |
| 4. Fuel pump connector | |
| 5. Fuel filter bolts | |
| Removal Note | page F–105 |
| 6. Brake pipe joint | |
| Removal Note | page F–105 |
| 7. Battery cable | |
| Removal Note | page F–105 |
| 8. Rear crossmember assembly | |
| Removal Note | page F–105 |
| 9. Fuel tank unit | |
| 10. Tow-way check valve | |
| 11. Fuel vapor valve | |
| 12. Fuel tank |
Removal note
Fuel filter bolts
- Remove the fuel filter cover.
- Remove the fuel filter bolts.
- Remove the fuel filter with the fuel hoses still connected.
Brake pipe joint
- Remove the brake pipe joint nuts.
- Remove the brake pipe joint with the brake pipe and brake hose still connected.
Battery cable
- Remove the battery cable clamp as shown in the figure.
Rear crossmember assembly
- Support the rear crossmember assembly with a transmission jack.
- Remove the rear crossmember mounting bolts and nuts.
Caution
- Do not damage the brake hose, brake pipe, or fuel hoses.
- Lower the rear crossmember assembly.
Parts & tools for this job For 1990 Mazda MX-5
- PARTExhaust gasketSearch: Mazda MX-5 1990 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.