Fuel odor
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Fuel odor › Fuel odor
Fuel and emission control systemsFuel odor
26 FUEL ODOR
| DESCRIPTION | • Gasoline odor in cabin |
|---|---|
| [TROUBLESHOOTING HINTS] | |
| ① Poor connection or damaged fuel system or evaporative emission control system | |
| ② Charcoal canister overflow due to evaporative emission control system malfunction | |
| STEP | INSPECTION | ACTION | |
|---|---|---|---|
| 1 | Check if fuel leak or damage are visible at fuel system and evaporative emission control system | Yes | Repair or replace page F–100 |
| No | Go to next step | ||
| 2 | Check if “00” is displayed on Self-Diagnosis Checker with ignition switch ON page F–78
49 H018 9A1 49 B019 9A0 |
Yes | Go to next step |
| No | Malfunction Code No. displayed Check for cause (Refer to specified check sequence) page F–80 |
||
| “88” flashes Check ECU terminal 1F voltage page F–128 Voltage: Approx. 12V (Ignition switch ON) ⇨ If OK, replace ECU page F–127 ⇨ If not OK, check wiring between ECU and Self-Diagnosis Checker page F–7 |
|||
| 3 | Check if vacuum is felt at solenoid valve (purge control) with engine running and throttle valve opened (Neutral switch connector disconnected) |
Yes | Go to Step 5 |
| No | Check for solenoid valve operating sound in this condition ⇨ If OK, check vacuum hoses for clogging page F–6 ⇨ If not OK, go to next step |
||
| 4 | Apply 12V and ground to solenoid valve (purge control) and check if air flows through valve |
Yes | Check ECU terminal 2X voltage page F–130 |
| No | Replace solenoid valve page F–119 | ||
| 5 | Try known good ECU page F–127 |
Parts & tools for this job For 1990 Mazda MX-5
- PARTExhaust gasketSearch: Mazda MX-5 1990 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.