Fuel System
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Fuel System › Fuel System
Fuel and emission control systemsFuel System
| STEP | INSPECTION | ACTION | |
|---|---|---|---|
| 4 | With condition of step 3, check if fuel line pressure is held after ignition switch is turned OFF ↰ page F–102 Fuel line pressure: More than 147 kPa (1.5 kg/cm², 21 psi) for 5 min. PRESSURE MINIMUM IGNITION SWITCH OFF 5 MIN. TIME |
Yes | Go to Step 6 |
| No | Go to Step 5 | ||
| 5 | Check if fuel line pressure is held after ignition switch is turned OFF and blocking outlet of pressure regulator ↰ page F–111 Fuel line pressure: More than 147 kPa (1.5 kg/cm², 21 psi) for 5 min. |
Yes | Replace pressure regulator ↰ page F–112 |
| No | Check fuel pump hold pressure ↰ page F–107 | ||
| ⇒ If OK, check injector for fuel leakage ↰ page F–113 ⇒ If not OK, replace fuel pump ↰ page F–108 |
|||
| 6 | Try known good ECU and check if condition improves ↰ page F–127 |
Yes | Replace ECU |
| No | Change fuel to another brand |
Parts & tools for this job For 1990 Mazda MX-5
- PARTFuel filterSearch: Mazda MX-5 1990 fuel filter
- TOOLFuel pressure test kitSearch: fuel pressure test kit
- TOOLFuel line disconnect toolSearch: fuel line disconnect tool
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.