Description
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- F Fuel and emission control systems › Description
Fuel and emission control systemsDescription
DESCRIPTION
An A/C cut-off system is used to improve idle smoothness after just starting the engine and to improve acceleration performance.
After Engine Has Been Started
The A/C is cut-off for 2 sec. just after the engine is started.
Acceleration
The A/C is cut-off upon wide-open-throttle acceleration for approx. 16 sec..
System Operation
- Start the engine.
- Turn the blower switch and A/C switch ON.
- Disconnect the throttle sensor connector.
- Connect the throttle sensor connector terminals TL and POW with a jumper wire and verify that the condenser fan stops for approx. 16 sec..
- If not correct, check engine control unit terminals 1Q and 2L voltages. (Refer to page F–129.)
Parts & tools for this job For 1990 Mazda MX-5
- PARTExhaust gasketSearch: Mazda MX-5 1990 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.