Inspection
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- F Fuel and emission control systems › Inspection
Fuel and emission control systemsInspection
69G04A-177
Inspection
- Remove the airflow meter. (Refer to page F–92.)
- Check the airflow meter body for cracks.
- Verify that the measuring plate moves smoothly.
- Disconnect the connector from the airflow meter.
- Move the measuring plate and check for resistance between the terminals with an ohmmeter.
| Terminal | Resistance (Ω) | |
|---|---|---|
| Fully closed | Fully open | |
| E2↔Vs | 200—600 | 20—1,000 |
| E2↔Vc | 200—400 | |
| E2↔THAA (Intake air thermosensor) |
−20°C ( −4°F) | 13,600—18,400 |
| 20°C ( 68°F) | 2,210— 2,690 | |
| 60°C (140°F) | 493— 667 | |
| E1↔Fc | ∞ | 0 |
- Connect the airflow meter connector after checking.
Parts & tools for this job For 1990 Mazda MX-5
- PARTExhaust gasketSearch: Mazda MX-5 1990 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.