Procedure
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- F Fuel and emission control systems › Procedure
Procedure
Set conditions to deactivate each switch
• All accessories OFF
• Transmission in neutral
• All pedals released
Verify that monitor lamp does not illuminate
YES
Check each switch as described
NO
Check each switch and related wire harness
• Clutch and Neutral switch :Refer to page F–139
• Idle switch :Refer to page F–136
• Pow switch :Refer to page F–136
• Stoplight switch :Refer to Section T
• Headlight switch :Refer to Section T
• Blower switch :Refer to Section T
• A/C switch :Refer to Section U
• Water thermoswitch :Refer to Section E
Neutral and Clutch switches
Shift transmission into gear
Verify that monitor lamp illuminates with clutch pedal released
YES
Depress clutch pedal
Verify that monitor lamp does not illuminate
Return transmission to neutral
NO
PC: • Neutral or clutch switch malfunction (Refer to F–139)
• Open circuit in related wire harness
• Engine control terminal 1V malfunction (Refer to page F–129)
NO
PC: • Clutch switch malfunction (Refer to page F–139)
Idle terminal
Depress accelerator pedal (less than full) and verify that monitor lamp illuminates
YES
Idle terminal OK
Release accelerator pedal
NO
PC: • Idle terminal malfunction (Refer to page F–136)
• Short circuit in wire harness from idle switch to engine control unit
• Engine control unit terminal 1N malfunction (Refer to page F–128)
Pow terminal
Depress accelerator pedal (less than full) and verify that monitor lamp illuminates
YES
Pow terminal OK
Release accelerator pedal
NO
PC: • Pow terminal malfunction (Refer to page F–128)
• Short circuit in wire harness from Pow terminal to engine control unit
• Engine control unit terminal 2L malfunction (Refer to page F–129)
Stoplight switch
Depress brake pedal and verify that monitor lamp illuminates
YES
Stoplight switch OK
Release brake pedal
NO
PC: • Stoplight switch malfunction (Refer to Section T)
• Open circuit in wire harness from stoplight switch to engine control unit
• Engine control unit terminal 1O malfunction (Refer to page F–128)
Parts & tools for this job For 1990 Mazda MX-5
- PARTExhaust gasketSearch: Mazda MX-5 1990 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.