[troubleshooting hints]
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- F Fuel and emission control systems › [troubleshooting hints]
Fuel and emission control systems[troubleshooting hints] · page 1 of 2
DESCRIPTION • Engine runs rough while decelerating and abnormal combustion occurs in exhaust system
[TROUBLESHOOTING HINTS]
- Air/Fuel mixture too rich
- Air cleaner element clogged
- Fuel injection control malfunction (Fuel cut control)
- Injector fuel leakage
- Ignition timing misadjustment
| STEP | INSPECTION | ACTION | |
|---|---|---|---|
| 1 | Check if "00" is displayed on Self-Diagnosis Checker with ignition switch ON page F–78
|
Yes | Go to next step |
| No | Malfunction Code No. displayed Check for cause (Refer to specified check sequence) page F–80 |
||
| "88" flashes Check ECU terminal 1F voltage page F–128 Voltage: Approx. 12V (Ignition switch ON) |
|||
| ⇒ If OK, replace ECU ⇒ If not OK, check wiring between ECU and Self-Diagnosis Checker page F–127 page F–7 |
|||
| 2 | Check switches for correct operation with Self-Diagnosis Checker Monitor Lamp with ignition switch ON page F–89
|
Yes | Go to next step |
| No | Lamp not ON/OFF with specified switch Check for cause (Refer to specified check sequence) page F–90 |
||
| Lamp always ON Check wiring between ECU terminal 1D and Self-Diagnosis Checker page F–7 |
|||
| 3 | Check for correct ignition timing at idle page F–75 Ignition timing: 10° ± 1° BTDC
|
Yes | Go to next step |
| No | Adjust page F–75 |
Parts & tools for this job For 1990 Mazda MX-5
- PARTExhaust gasketSearch: Mazda MX-5 1990 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.