Engine electrical system: Specifications
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Specifications › Specifications
Engine electrical systemSpecifications
SPECIFICATIONS
| Item | Engine | B6 DOHC | |
|---|---|---|---|
| Battery | Voltage | V | 12, Negative ground |
| Type and capacity | (5-hour rate) | S46A24L(S) (32 Ah) Maintenance-free |
|
| Dark current*1 | mA | 20.0 | |
| Alternator | Type | A.C. | |
| Output | V, A | 12, 60 | |
| Regulator type | Transistorized (built-in IC regulator) | ||
| Regulated voltage | 14.1—14.7 | ||
| Brush length mm (in) |
Standard | 21.5 (0.85) | |
| Minimum | 8 (0.31) | ||
| Drive belt tension mm (in) |
New | 8—9 (0.31—0.35) | |
| Used | 9—10 (0.35—0.39) | ||
| Starter | Type | Conventional | |
| Output | V-kW | 12-0.95 | |
| Brush length mm (in) |
Standard | 17.0 (0.67) | |
| Minimum | 11.5 (0.45) | ||
| Ignition system | Type | Electronic spark advance (ESA) | |
| Spark advance control | Engine control unit controls spark advance | ||
| Ignition timing | BTDC | 10° ± 1° *2 | |
| Ignition coil | Type | Molded | |
| Primary coil winding | kΩ | 0.78—0.94 | |
| Secondary coil winding | kΩ | 11.2—15.2 | |
| Spark plug | Type | NGK : BKR5E-11 BKR6E-11 BKR7E-11 Nippon Denso : K16PR-U11 K20PR-U11 K22PR-U11 |
|
| Plug gap | mm (in) | 1.0—1.1 (0.039—0.043) | |
| Firing order | 1—3—4—2 | ||
*1 Dark current is the constant flow of current while the ignition switch is OFF (i.e. engine control unit, audio, etc.)
*2 With System Selector (49 B019 9A0) test switch at SELF TEST.
Cylinder Arrangement
Parts & tools for this job For 1990 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 1990 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.