Brush
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Starter Interlock Switch › Brush
Engine electrical systemBrush
Brush
If the brushes are worn beyond the wear limit or if the wear is near the limit, replace the brushes.
Standard: 17mm (0.67 in)
Wear limit: 11.5mm (0.45 in)
STARTER INTERLOCK SWITCH
The clutch pedal must be depressed during starting for battery power to be supplied to the starter.
Inspection
- Disconnect the interlock switch connector.
- Check continuity of the switch with an ohmmeter.
| Pedal | Continuity |
|---|---|
| Depressed | Yes |
| Released | No |
- If not as specified, replace the interlock switch.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.