Adjustment shim
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Adjustment shim (J) › Adjustment shim
Manual transmissionAdjustment shim
Adjustment shim
After measuring dimensions (A) and (B) shown in the figure, use an adjustment shim(s), as specified below, of the thickness corresponding to the value of (A) minus (B), so that bearing end play will be within specification.
Bearing end play: 0—0.1mm (0—0.004 in)
Adjustment shim thickness:
0.10mm (0.004 in), 0.15mm (0.006 in), 0.30mm (0.012 in)
Release fork
- Apply Mori white TA No.2 or equivalent organic molybdenum grease to the shaded areas of the release bearing and release fork.
- Install the release bearing and release fork.
Parts & tools for this job For 1990 Mazda MX-5
- PARTClutch kitSearch: Mazda MX-5 1990 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Mazda MX-5 manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.