Precaution
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Assembly › Precaution
Manual transmissionPrecaution
Precaution
- All O-rings and gasket must be replaced with the new ones included in the overhaul kit.
- Before assembly, make sure all parts are completely clean.
- Assemble the parts within 10 minutes after applying sealant. Allow all sealant to cure at least 30 minutes after assembly before filling the transmission with transmission oil.
Clutch hub
Caution
- Align the synchronizer ring grooves with the clutch hub keys during installation.
Note
- The synchronizer rings all have the same basic shape. Carefully note these distinguishing features:
a) 5th and Reverse synchronizer rings are the smallest.
b) Reverse has 2 notches in the teeth.
c) 4th and 3rd are the next larger and are exactly the same.
d) 2nd and 1st are the biggest and are exactly the same. - Press each clutch hub assembly onto the mainshaft in the proper direction.
- Install the clutch hubs with the chamfers of the inner gear teeth as shown.
Parts & tools for this job For 1990 Mazda MX-5
- PARTClutch kitSearch: Mazda MX-5 1990 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Mazda MX-5 manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.