Disassembly note
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Disassembly (J) › Disassembly note
Manual transmissionDisassembly note
Disassembly note
Clutch hub assembly (3rd/4th)
- Position the SST between 2nd and 3rd gears.
Caution
- Hold the mainshaft with one hand so that it does not fall.
- Press the mainshaft out of the clutch hub assembly (3rd/4th) and 3rd gear.
Clutch hub assembly (1st/2nd)
Caution
- Hold the mainshaft with one hand so that it does not fall.
Press the mainshaft out of the clutch hub assembly (1st/2nd) and 2nd gear.
Bearing Housing Parts
Disassemble in the order shown in the figure, referring to Disassembly Note.
- Snap ring
- Adjustment washer
- Reverse idler gear
Inspection........ page J–24 - Thrust washer
- Reverse idler gear shaft
Disassembly Note
.................... page J–21
Inspection ........ page J–24 - Bearing cover
- Mainshaft front bearing
Disassembly Note
.................... page J–21
Inspection ........ page J–24 - Adjustment shim
- Countershaft center bearing
Disassembly Note
.................... page J–21
Inspection ........ page J–24 - Adjustment shim
- Bearing housing
Parts & tools for this job For 1990 Mazda MX-5
- PARTClutch kitSearch: Mazda MX-5 1990 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Mazda MX-5 manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.