Assembly note
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- J Manual transmission › Assembly note
Manual transmissionAssembly note
Assembly note
Oil seal
- Apply transmission oil to outer periphery.
- Install a new oil seal with the SST.
Rod cover
- Apply transmission oil to rubbers on the rod cover.
- Install the rod cover with the mark facing forward.
Roll pin
Caution
- Install the roll pin with the seam facing as shown in the figure.
Install a new roll pin into the control lever end.
Select-lock spindle, spring, and spring cap
- Install the select-lock spindle, spring, and spring cap.
Tightening torque:
7.8—11 N·m (80—110 cm-kg, 69—95 in-lb)
Note
- If the select-lock spindle is not pushed down, the ball will not correctly engage the select-lock spindle.
- Push the select-lock spindle down by pushing on the control rod.
Parts & tools for this job For 1990 Mazda MX-5
- PARTClutch kitSearch: Mazda MX-5 1990 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Mazda MX-5 manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.