Intermediate housing
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- J Manual transmission (J) › Intermediate housing
Manual transmissionIntermediate housing
Caution
- The total thickness of the front and rear washers should be 5.9—6.0mm (0.2323—0.2362 in).
- The following washer thicknesses are available.
| 2.2mm (0.0866 in) | 3.2mm (0.1260 in) |
| 2.7mm (0.1063 in) | 3.7mm (0.1457 in) |
| 3.0mm (0.1181 in) |
Intermediate housing
- Apply sealant to the contacting surfaces of the intermediate housing and bearing housing.
- Mount the intermediate housing to the bearing housing by tapping it lightly with a plastic hammer.
Roll pin
Caution
- Install the roll pin with the seam facing forward.
Install a new roll pin into each shift rod end.
Parts & tools for this job For 1990 Mazda MX-5
- PARTClutch kitSearch: Mazda MX-5 1990 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Mazda MX-5 manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.